Red Deer Scissor Lift License

Red Deer Scissor Lift License - The operation of scissor lifts carries an inherent chance of danger. Whatever type of powered machine needs proper handling in order to avoid accidents leading to injury or damage. Businesses should ensure that workers utilizing this particular machinery have the required experience.

Unqualified personnel must not be allowed by their companies to utilize scissor lifts. The lift is designed to lift people and materials to varied heights. Failure to know and completely abide by safety standard could lead to damage to the lift or injuries for users.

There are no rules governing the utilization of fall protection for those who use scissor lifts. Then again, manufacturers may recommend the utilization of fall protection and in various circumstances tying off in scissor lifts may be required by employer rules, local rules or job-specific risk assessment.

To be able to make certain that the scissor lift is in good working condition prior to using the machine, the operator has to perform a thorough inspection. This is the operator's job, even if the unit has already been in service that day. The equipment's operator's instruction manual contains a checklist for pre-operation.

Examples of what to look for when doing a pre-operation check consist of checking tire-inflation pressure, and checking ground controls and controls in the platform in order to make sure they are working. When retracting or extending the boom, watch for delayed movement on the fly section that can indicate loose cables. Whilst operating the controls, make sure that the emergency stop switches are working. Operate functions against the equipment's cutout switches. Check the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters should stop the unit automatically before it moves into an unstable position, if they are functioning correctly. If they aren't, turn off the lift and ensure that it is fixed before utilizing it again.

Safe operating procedures must be followed at all time, with the levers being operated with controlled, even pressure. A control lever must never be pushed from one position to the opposite position. The lever must be shifted to neutral, prior to stopping, and afterward proceeding in the desired direction. When released, levers and control switches should automatically return to the neutral position. Depress the foot switch before operating platform controls.

Click to Download the pdf